• <rt id="nodn7"></rt>

      1. 歡迎光臨
        手機網站 | 聯系我們:027-59325428 18672922738 | 加入收藏
        • 當前位置:武漢辰龍天和科技有限公司 > 產品中心 > 進口激光測距傳感器 > FAE意大利LS113PS激光傳感器 帶網絡DP通訊

          FAE意大利LS113PS激光傳感器 帶網絡DP通訊

          產品型號: LS113PS
          品  牌: FAE
          所 在 地: 湖北武漢
          更新日期: 2023-11-14
          FAE意大利LS113PS激光傳感器 帶網絡DP通訊

          General Product Description

          The LS113PS is a laser distance measuring module to determine distances from 0.1 m to 30 m, using natural surfaces,

          or to measure distances up to 150 m with a target reflector. Providing a red laser sighting point, the LS113PS allows you to

          unequivocally mark a particular target. Its effective operating range depends on the reflectance and surface qualities

          of the targets being sighted.

          The module works based on comparative phase measurement. It emits modulated high-frequency light which is diffusely

          reflected back from the target with a certain shift in phase to be compared with a reference signal.

          From the amount of phase shift, a required distance can then be determined with millimeter accuracy.

          A distance measurement cycle can be triggered:

          • via the Profibus

          • from an external trigger source (external trigger mode)

          • via the SSI.

          Special performance features are:

          • Profibus interface

          • Broad range of parameter setting options via Profibus

          • SSI interface

          • Two switching outputs, each with selectable parameter settings

          • External trigger input, with selectable parameter settings

          • Capable of operating at outdoor temperatures from +15°C to +30°C with ±2 mm accuracy

          • Up to 30 m reach for distance measurement, with potential for 150 m reach if additional reflectors are mounted onto the target.

          • Visible laser beam for easier sightingl.

          The LS113PS measuring module is shipped in a rugged cardboard box with adequate padding for safe transportation.

          Conforming Use

          • Measurement of distances and output of measured data to the Profibus.

          • Special measuring functions.

          • Compliance with prescribed temperatures for operation and storage.

          • Operation at correct voltage level.

          • Application of specified signal levels to the appropriate data lines.

          Nonconforming Use

          • Do not operate the LS113PS in any other way than described under “Intended & Conforming Use“ above and only in a proper

          working condition.

          • Safety devices must not be defeated or otherwise rendered ineffective.

          • Information and warning signs must not be removed.

          • Repair work on the LS113PS must not be carried out by anyone other than FAE S.r.l. personnel.

          • Refrain from using the LS113PS in an explosive environment.

          • Measurement with the LS113PS pointed at the sun or other strong lightsources may produce faulty results.

          • Measurement of targets with poor surface reflectance in a strongly reflecting environment may also result in faulty

          measurement values.

          • Measurement of strongly reflecting surfaces may deliver faulty results.

          • Measurement performed through transparent optical media, for example, glass, optical filters, plexiglass, etc. may equally

          produce incorrect results.

          • Rapidly changing measuring conditions are likely to falsify the result of measurement.

          LS113PS意大利激光傳感器 帶網絡DP通訊 激光測距儀

          LS113PS意大利激光傳感器 帶網絡DP通訊 激光測距儀

        • 留言
          標  題: *(必填)
          內  容: *(必填)
          郵  箱:
          手  機:
          固  話:
          公  司: *(必填)
          地  址: *(必填)
        版權所有 © 武漢辰龍天和科技有限公司
        聯系人:廖猛  聯系電話:027-59325428  傳真:027-84881397

        技術支持:谷瀑     免責申明     鄂ICP備12004745號-1